Единично реле Fibaro Single Switch 2

Single Switch 2 was designed to activate and deactivate electrical devices. Thanks to its small size it can be mounted in junction boxes or inside device casings. The module is controlled either through the Z-Wave network or a simple switch. Power and energy usage measurement feature allows you to monitor and lower your utility bills.

Connect your FIBARO Switch 2 to the system and other devices to enjoy the almost endless possibilities!

General Information

Single Switch 2 is equipped with sockets that have an increased cross-section which allows you to connect it to wires with a larger diameter and simplify the installation process.

A built-in RGB diode is of invaluable assistance during the installation process. The light will show whether Single Switch 2 has been added or removed from the network. You can also see whether a calibration or an update was successful.

Single Switch 2 has an increased signal range which gives you more installation possibilities and an increased network coverage.

Just place the module in the junction box and connect it to an existing installation. The module's miniature size allows you to place it in many convenient spots.

Even the most complex actions can be activated via a wall switch connected to a module. With just a press of the button when entering a room, it’s as natural as turning on the lights.

Single Switch 2 features many safety measures that prevent it from voltage drop, overheating, or overcharging. In the case of any of these events, the system will immediately send you a notification.

Single Switch 2 allows you to monitor electrical devices that are currently inactive. The system will notify you if you leave a device running and allow you to turn it off remotely.

The new Single Switch 2 allows you to measure the power and energy of the connected load. You can see how much energy is used in your home through clear charts and use that information to reduce your electricity bills.

You may control the module and receive information through your home PCs and mobile devices. Single Switch 2 do not require expensive control panels in order to function.

Are you a parent or do you plan to become one in the near future? Monitoring your children’s study and play time, along with the ability to automatically activate their favorite multimedia might interest you.

Single Switch 2 module, just like the entire FIBARO system, can be controlled from any place on earth. All you need is internet access.

Note: This module requires 3-wire (including neutral) installation. The output is not potential-free, it does not allow to control a dry contact or load another supply voltage than the input.

Technical Details

• Scene management: 1 to 3 presses and holding the key pressed down can be mapped to four different actions
• System of control for each channel: Standard control, Delayed device activation, Delayed device deactivation, Auto on and auto off mode with additional options